Precautions for the use of rock slab edging machine

Stone is currently a widely used and widely defined inorganic non-metallic material. It can also be used in Daxing civil engineering, household use, methods, grooming and other fields. It is very rich in types.On the periphery of the commonly used tempered glass and printing and dyeing glass, there are also optical glass, dimming stone and other grades that are eager for higher technology.In this article, we will introduce the precautions for the use of rock slab edging machine.

1. Precautions for the application of rock slab edging machine

1. For all kinds of newly purchased rock slab edging machines, you must read the instruction manual before using it.In the original book, the transmission regulations of the machine, the ideologies of various handles, handwheels, electrical buttons, waterways, and air path control valves are clearly derived, and the maintenance knowledge of the equipment can only be operated on the machine from then on.

2. The natural soil of the grinding head of the rock slab edging machine has a great deterrent to the grinding quality of the glass. The position of the grinding head, gestures, after tea and drinks, etc. have been adjusted at the factory. Except for the forward and backward grinding heads, the other shapes should not be moved, so as to avoid imperceptibly improving the grinding quality.In addition, the wear resistance of the grinding head is undoubtedly too large, otherwise it is easy to destroy the waterproof sleeve, cause water seepage, and easily burn out the motor.

3. Whether the cooling is sufficient or not also has a great impact on the edging function of the rock slab.It is necessary to review the refrigeration pipeline frequently for any signs of failure.In particular, the pipeline of the linear edging machine is easy to be eliminated by the bristles, and it cannot be detected after blocking, which will lead to insufficient cooling and affect the quality of the edging.

4. The continuously variable transmission used in the rock slab edging machine will eventually be in an open state when adjusting the progress, otherwise it will easily destroy the continuously variable transmission of the edging machine.